ONKYO A-1VL ユーザーズマニュアル

11

Connecting the A-1VL—Continued

You can use the A-1VL as a preamplifier by connecting 
the A-1VL to a power amplifier.
When you use the A-1VL as a preamplifer, connect the 
main in terminals on the power amplifier to the PRE-
OUT terminals on the A-1VL.

Note:
The signal from the PREOUT terminal will be output 
whether the DIRECT function is enabled or not.

You can use the A-1VL as a power amplifier by
connecting the A-1VL to a preamplifier.
When you use the A-1VL as a power amplifier, connect 
the pre out terminals on the preamplifier to the MAIN 
IN terminals on the A-1VL.
You can enjoy surround sound playback by connecting 
front left and right speakers to the A-1VL and connect-
ing center and surround speakers to the preamplifier. If 
you have a powered subwoofer, connect it to the 
preamplifier’s PRE OUT.

Note:
Before you use the A-1VL as a power amplifier, be sure 
to turn on the DIRECT function by pressing the 
DIRECT button. (page 13)

Notes:
• Before connecting the power cord, connect all of your 

speakers and audio components.

• Turning on the A-1VL may cause a momentary 

power surge that might interfere with other electrical 
equipment on the same circuit. If this is a problem, 
plug the A-1VL into a different circuit.

• Do not use a power cord other than the one supplied 

with the A-1VL. The supplied power cord is designed 
exclusively for use with the A-1VL and should not be 
used with any other equipment.

• Never disconnect the power cord from the A-1VL 

while the other end is still plugged into a wall outlet. 
Doing so may cause an electric shock. Always 
disconnect the power cord from the wall outlet first, 
and then the A-1VL.

1. Connect the supplied power cord to the A-1VL’s AC

INLET.

2. Plug the power cord into an AC wall outlet.