Clarion DVH940N User Manual
DVH940
7
English
Dolby Pro Logic II Menu Selection
About the Dolby Pro Logic II Mode
• Initial setting is [PL II OFF].
■
MUSIC mode
• Suitable for CDs and other stereo sources.
■
MATRIX mode
• Suitable for AM/FM radio sources.
■
MOVIE mode
• Suitable for DVD video movies.
■
VIRTUAL mode
• Suitable for movies and other audio sources.
1. Press the [ADF] button to enter PLII mode.
2. Press the [
a
] or [
d
] button to select PLII.
[MUSIC]
➜
[MATRIX]
➜
[MOVIE]
➜
[VIRTUAL]
➜
[PLII OFF]
3. Press the [ADF] button to return to the
original mode.
Notes:
• The PL II menu cannot be selected when [SP-
• The PL II menu cannot be selected when [SP-
SEL] has been used to set center speakers and
rear (surround) speakers to [OFF].
rear (surround) speakers to [OFF].
• Sound is produced from the center speaker only
when either Dolby Pro Logic II mode, or DSF
mode is set to ON (2-channel source playback).
mode is set to ON (2-channel source playback).
DSF Setting
DSF(Digital Sound Field) makes it possible
through sound simulation to enjoy the acoustic
experience you would have in a concert hall or a
live performance hall.
through sound simulation to enjoy the acoustic
experience you would have in a concert hall or a
live performance hall.
• Initial setting is [OFF].
1. Press the [ADF] button to enter DSF mode.
2. Press the [
a
] or [
d
] button to select DSF
menu.
1
HALL: Large concert hall.
2
CHURCH: Charch with a vaulted ceiling.
3
STADIUM: Large stadium without roof or
walls.
4
LIVE: Live performance hall, larger than a
jazz club.
5
JAZZCLUB: Jazz club with a low ceiling.
6
THEATER: Movie or drama theater.
7
OFF: DSF off.
3. Press the [ADF] button to return to the
original mode.
5. OPERATIONS
Operations (DXZ745MP)
Setting parametric equalizer
(P.EQ)
(P.EQ)
The parametric equalizer function allows you to
adjust the frequency characteristics to suit the
car.
adjust the frequency characteristics to suit the
car.
• The initial value provides the following settings
for all speakers.
FREQ = 1kHz, Q =1, GAIN = 0dB
FREQ = 1kHz, Q =1, GAIN = 0dB
• Some distortion may be heard if the [ROTARY]
knob is turned rapidly.
1. Press and hold the [ADJ] button for 1 second
or longer to enter adjust mode.
2. Press the [
a
] or [
d
] button to change to
the [P.EQ
E
E
E
E
E
] display.
3. Press the [ENT] button to display the
adjustment item.
Press the [
a
] or [
d
] button to select
[EFFECT], [SIGNAL], [SP-SEL], [BAND],
[FREQ], [Q], [GAIN] or
[FREQ], [Q], [GAIN] or
[SIGNAL].
●
EFFECT: P.EQ effect is turned on or off.
• Initial setting is [OFF]
●
SIGNAL: selects the adjustment signal.
• SGNL P-NOIS: set when pink noise is to
be used
• SGNL MUSIC: set to use music signals
●
SP-SEL: selects the speakers whose P.EQ
value is to be adjusted.
• SP FRONT: front speaker
• SP CENTER: center speaker
• SP SURROUND: surround speaker
value is to be adjusted.
• SP FRONT: front speaker
• SP CENTER: center speaker
• SP SURROUND: surround speaker
●
BAND: selects the frequency band (Band
1 to 3) to adjust.
1 to 3) to adjust.
●
FREQ: selects the frequency for bands 1
to 3.
• The range of adjustments is from 20 Hz
to 3.
• The range of adjustments is from 20 Hz
to 20 kHz.
●
Q: sets the Q curve.
• Larger numbers produce a sharper Q
• Larger numbers produce a sharper Q
characteristics curve while smaller
numbers produce gentler characteristics.
Adjustments are made in the range Q1
to Q20.
numbers produce gentler characteristics.
Adjustments are made in the range Q1
to Q20.
●
GAIN: adjusts the output level.
• Adjustments are made in the range -12
dB to +12 dB.