Clarion DVH940N User Manual

DVH940

The center speaker, rear (surround) speakers
and sub woofer have to be set to on or off to
achieve maximum sound quality.

• The initial setting is [ON].

1. Press and hold the [ADJ] button for 1 second

or longer to enter adjust mode.

2. Press the [

a

] or [

d

] button to change to

the [SP-SEL 

E

] display.

3. Press the [ENT] button to display the

adjustment item.
Press the [

a

] or [

d

] button to select

[CENTER-SP], [SURROUND-SP] or [SUB-
WOOFER].
• CENTER-SP: center speaker
• SURROUND-SP: rear (surround) speaker
• SUB-WOOFER: subwoofer

4. Turn the [ROTARY] knob clockwise or

counterclockwise to select [ON] or [OFF].
• ON: Speaker installed
• OFF: Speaker not installed
• When a sub woofer is used, set [ON+],

[ON-] or [OFF]. The normal setting is
[ON+], but use the [ON-] setting when this
provides a better effect for low frequency
range.

5. Press the [ADJ] button to return to the

original mode.

This function is used to set a filter frequency that
suits the frequency characteristics of the used
speakers.

• The initial value of [FRONT HPF], [SRD HPF]

is [THRGH] (no filter).

• The initial value of [CENTER HPF], [SUB-W

LPF] is [120 Hz]

• A speaker that was turned off in the Section

“Turning speakers on or off (SP-SEL)” is not
displayed.

1. Press and hold the [ADJ] button for 1 second

or longer to enter adjust mode.

2. Press the [

a

] or [

d

] button to change to

the [FILTER 

E

] display.

3. Press the [ENT] button to display the

adjustment item.

4. Turn the [ROTARY] knob clockwise or

counterclockwise to adjust each value.

5. Press the [ADJ] button to return to the

original mode.