TEAC MCDV600 User Manual

Use a commercially available S-video cable to connect the unit to 
the S-video input of a suitably equipped TV or monitor. Use this 
connection in preference to a composite video connection.

Use commercially available component video cables to connect 
the unit to the component video inputs of a suitably equipped 
TV or monitor to enjoy a high-quality picture.
Use these terminals in preference to S-video or composite video 
connections.

< If the component video terminals are connected to a TV with 

progressive scan capabilities, the output can be set to match this 
(page 36).

<  Note that these terminals cannot be connected to high definition 

component terminals.

Use the supplied RCA (pin) video cable to connect the unit to the 
composite video connector of a TV or monitor. 
Use this connection only if no other video connection method is 
available.

<  Adjust the video aspect ratio to match that of the TV (page 34).

< This unit adopts analog copy protection features. If the unit is 

connected to a TV through a VCR (video cassette recorder), the 
resulting playback may be affected. Connect the unit directly to 
the TV.

< In all cases, use the highest quality cables for the best possible 

picture.

<  Select proper setting in the VIDEO OUTPUT setup (page 36).

Use a commercially available HDMI cable to connect the unit to a 
HDMI compatible TV or monitor.

< If the TV or monitor is equipped only with a DVI terminal, a 

suitable adaptor cable or adaptors should be used. Note that the 
TV connected in this way must be HDCP compatible. 

  Also note that this connection outputs no sound.

< Make sure that you read and understand the documentation 

provided with the HDMI component.

< 480p (NTSC) or 576p (PAL)

< 720p
< 1080i

< 1080p

<  See page 37 for further details on HDMI video output formats.

To output audio from the HDMI terminal
If the connected HDMI component is capable of inputting HDMI 
audio, digital audio can be output from the HDMI terminal.

< Select “ALL” or “PCM only” in the DIGITAL AUDIO SETUP (DIGITAL 

OUTPUT) (page 35).

< To enjoy the digital surround audio from DVD-Video discs, 

connect the HDMI terminal to a surround amplifier and set the 
DIGITAL AUDIO SETUP (DIGITAL OUTPUT) to “ALL” (page 35).