Panasonic SC-AKX18 User Manual

Confidential 

Until:  

R

Q

T9899

Clock and timers

Setting the clock

This is a 12-hour clock.

1

Press [SETUP] to select “CLOCK”.

2

Press [R, T] to set the time and then press [OK].

To check the time

Press [SETUP] to select “CLOCK” and the press [OK].
In standby mode, press [DISPLAY].

Note:
Reset the clock regularly to maintain accuracy.

Sleep timer

The sleep timer turns off the system after the set time.

1

Press [SETUP] to select “SLEEP”.

2

Press [R, T] to select the setting (in minutes) and 
then press [OK].
To cancel, select “OFF”.

Note:
• The remaining time is always shown on the display. The 

display changes temporarily when you perform other 
operations.

• The play and sleep timer can be used together.
• The sleep timer always comes first. Be sure not to set an 

overlapping time.

Play timer

(Except for Bluetooth

®

 source)

You can set the timer to come on at a certain time to 
wake you up.

Preparation
Set the clock.

1

Press [SETUP] to select “TIMER ADJ”.

2

Press [R, T] to set the start time and then press 
[OK].

3

Re-do step 2 to set the end time.

4

Press [R, T] to select the source you want to play 
and then press [OK].

To start the timer

1

Press [SETUP] to select “TIMER SET”.

2

Press [R, T] to select “SET” and then press [OK].
“#” is shown.
To cancel, select “OFF”.
The system must be turned off for the timer to 
operate.

To check the setting

Press [SETUP] to select “TIMER ADJ” and then press 
[OK].
In standby mode, press [DISPLAY] two times.

Note:
• The timer starts at a low volume and increases gradually to 

the preset level.

• The timer comes on at the set time every day.
• If you turn off the system and then turn on again while the 

timer is in operation, the timer will not stop at the end time.

SC-AKX18 P RQT9899-P EN.fm  Page 12  Monday, April 14, 2014  10:41 AM

printing