Panasonic SC-AKX18 User Manual

Confidential 

Until:  

R

Q

T9899

External equipment

You can connect a VCR, DVD player etc., and listen to 
the audio through this system.

Preparation
• Disconnect the AC power supply cord.
• Turn off all equipment and read the appropriate 

operating instructions.

1

Connect the external equipment.

2

Press [RADIO/AUX] to select “AUX”.

3

Play the external equipment.

To adjust the input level

1

Press [SOUND] to select “INPUT LEVEL”.

2

Press [R, T] to select “NORMAL” or “HIGH” and 
then press [OK].

Note:
• The default setting is “NORMAL”.
• Select “NORMAL” if the sound is distorted during “HIGH” 

input level.

• Components and cables are sold separately.
• If you want to connect equipment other than those 

mentioned, refer to the audio dealer.

• Sound distortion can occur when you use an adapter.

Others

Auto off

This system automatically turns off when you do not use 
it for approximately 20 minutes.

1

Press [SETUP] to select “AUTO OFF”.

2

Press [R, T] to select “ON” and then press [OK].
“A.OFF” is shown.
To cancel, select “OFF”.

Note:
This function does not work when you are in radio source or 
when a Bluetooth

®

 device is connected.

Bluetooth

®

 standby

This function automatically turns on the system when you 
establish a Bluetooth

®

 connection from a paired device.

1

Press [SETUP] to select “BLUETOOTH STANDBY”.

2

Press [R, T] to select “ON” and then press [OK].
To cancel, select “OFF”.

Software version

You can check the software version of the system.

1

Press [SETUP] to select “SW VER.” and then press 
[OK].
The software version is shown.

2

Press [OK] again to exit.

Audio cable 
(not supplied)

Rear panel of 
this main unit

DVD player (not supplied)

ENGLISH

SC-AKX18 P RQT9899-P EN.fm  Page 13  Monday, April 14, 2014  10:41 AM

printing