ONKYO TX-SR574 User Manual

 

48

 

The Audio Adjust settings are explained below.

 

■

 

This setting determines which channel is output from a 
stereo multiplex source. Use it to select audio channels 
or languages with multiplex sources, multilingual TV 
broadcasts, and so on.

 

The main channel is output (default).

 

The sub channel is output.

 

Both the main and sub channels are output.

 

■

 

This setting determines which channel is output when 
the Mono listening mode is used with a stereo source.

 

Both the left and right channels are output 
(default).

 

Only the left channel is output.

 

Only the right channel is output.

 

These settings apply to only 2-channel (stereo) sources.

 

■

 

With this setting, you can broaden the width of the front 
stereo image when using the Pro Logic II Music or Pro 
Logic IIx Music listening mode.

 

Panorama function on.

 

Panorama function off (default).

 

■

 

With this setting, you can move the sound field forward 
or backward when using the Pro Logic II Music or Pro 
Logic IIx Music listening mode. The default value is 3. 
It can be adjusted from 0 to 6. Higher settings move the 
sound field forward. Lower settings move it backward. 
If the stereo image feels too wide, or there’s too much 
surround sound, move the sound field forward to 
improve the balance. Conversely, if the stereo image 
feels like it’s in mono, or there’s not enough surround 
sound, move it backward.

 

■

 

With this setting, you can adjust the width of the sound 
from the center speaker when using the Pro Logic II 
Music or Pro Logic IIx Music listening mode. Normally, 
the center channel sound is output by only the center 
speaker. (If you’re not using a center speaker, the center 
channel sound will be distributed to the front left and 
right speakers to create a phantom center). This setting 

adjusts the front left, right, and center mix, allowing you 
to adjust the weight of the center channel sound. It can 
be adjusted from 0 to 7 (default value is 3).

 

■

 

The DTS Neo:6 Music listening mode creates 6-channel 
surround sound from 2-channel (stereo) sources. With 
this setting, you can specify by how much the front left 
and right channel output is attenuated in order to create 
the center channel. It can be adjusted from 0 to 5 (default 
value is 2). This setting has no effect if no center speaker 
is connected.
When set to 0, the front left and right channel output is 
attenuated by half (–6 dB), giving the impression that the 
sound is located centrally. This setting works well when 
the listening position is considerably off center. When 
set to 5, the front left and right channels are not attenu-
ated, maintaining the original stereo balance.

 

■

 

This setting determines how Dolby Digital EX signals 
are handled. This setting is unavailable if no surround 
back speakers are connected or speaker set B is on.

 

If the source signal contains a Dolby Digital 
EX flag, the Dolby Digital EX listening mode 
is used (default).

 

You can select Pro Logic IIx Movie, Pro 
Logic IIx Music, Dolby Digital, or Dolby 
Digital EX.

 

■

 

On some DVD players, the signal from the multichannel 
subwoofer output is 15 dB higher than normal. You can 
change the subwoofer sensitivity to match your DVD 
player. Note that this setting only affects signals con-
nected to the SUBWOOFER input jack of the multichan-
nel DVD input.
You can select 0 dB (default), +5 dB, +10 dB, or +15 dB.
If you find that your subwoofer is too loud, try the 
+10 dB or +15 dB setting.

 

Setup closes.

TX-SR574_En.book Page 48 Wednesday, April 5, 2006 5:14 PM