Panasonic SA-HE100 User Manual
17
RQT6208
Specifications
(IHF’78)
■
AMPLIFIER SECTION
Rated minimum sine wave RMS power output
40 Hz–20 kHz both channels driven
0.9 % total harmonic distortion
0.9 % total harmonic distortion
100 W per channel (6
Ω
)
1 kHz continuous power output both channels driven
0.05 % total harmonic distortion
105 W per channel (6
Ω
)
Total harmonic distortion
rated power at 40 Hz–20 kHz
0.9 % (6
Ω
)
half power at 1 kHz
0.07 % (6
Ω
)
Power output at 1kHz each channel driven
0.9 % total harmonic distortion
Front (L, R)
100 W (6
Ω
)
Center
100 W (6
Ω
)
Surround (L, R, BACK)
100 W (6
Ω
)
Low frequency damping factor
30 (6
Ω
)
Load impedance
Front (L, R)
A or B
4–8
Ω
A and B
8
Ω
Center
6–8
Ω
Surround (L, R, BACK)
6–8
Ω
Dynamic headroom
2 dB (6
Ω
)
Frequency response
PHONO
RIAA standard curve ±0.8 dB
CD, TAPE, DVD, TV, VCR 1/VCR 2
10 Hz–70 kHz, ±3 dB
Input sensitivity
PHONO
0.4 mV (3 mV, IHF ’66)
CD, TAPE, DVD, TV, VCR 1/VCR 2
27 mV (200 mV, IHF ’66)
S/N (IHF A)
PHONO
70 dB (80 dB, IHF ’66)
CD, TAPE, DVD, TV, VCR 1/VCR 2
75 dB (85 dB, IHF ’66)
DVD 6CH
100 dB (IHF A, Rated Power, S=2V)
85 dB (94 dB, IHF ’66)
Input impedance
PHONO
47 k
Ω
CD, TAPE, DVD, TV, VCR 1/VCR 2
22 k
Ω
Tone controls
BASS
50 Hz, +10 to –10 dB
TREBLE
20 kHz, +10 to –10 dB
Subwoofer frequency response (–6 dB)
7–200 Hz
Digital input
Optical
3
Coaxial
1
Digital output
Optical
1
■
FM TUNER SECTION
Frequency range
87.9–107.9 MHz
Sensitivity
11.2 dBf (2 µV, IHF ’58)
50 dB quieting sensitivity
MONO
18.3 dBf (4.5 µV, IHF ’58)
STEREO
38.3 dBf (45 µV, IHF ’58)
Total harmonic distortion
MONO
0.2 %
STEREO
0.3 %
S/N
MONO
73 dB
STEREO
67 dB
Frequency response
20 Hz–15 kHz, +1 dB, –2 dB
Alternate channel selectivity
65 dB
Capture ratio
1.5 dB
Image rejection at 98 MHz
40 dB
Spurious response rejection at 98 MHz
75 dB
AM suppression
50 dB
Stereo separation
1 kHz
40 dB
10 kHz
30 dB
Antenna terminal
75
Ω
(unbalanced)
■
AM TUNER SECTION
Frequency range
530–1710 kHz
Sensitivity
20 µV, 330 µV/m
Selectivity
55 dB
IF rejection at 1000 kHz
50 dB
■
VIDEO SECTION
Output voltage at 1 V input (unbalanced)
1±0.1 Vp-p
Maximum input voltage
1.5 Vp-p
Input/output impedance
75
Ω
■
GENERAL
Power supply
AC 120 V, 60 Hz
Power consumption
450 VA, 350 W
Dimensions (W x H x D)
430 x 158 x 370 mm
(16-15/16'' x 6-7/32'' x 14-19/32'')
Mass
10.5 k
g
(23.1 lb.)
Power consumption in standby mode:
1 W
Notes:
1. Specifications are subject to change without notice.
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
To clean this unit, wipe with a soft, dry cloth.
¡
Never use alcohol, paint thinner or benzine to clean this unit.
¡
Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
came with the cloth carefully.
If the surfaces are dirty
Maintenance
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of
Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and
other world-wide patents issued and pending.
“DTS”, “DTS-ES Extended Surround” and “Neo:6” are
trademarks of Digital Theater Systems, Inc. Copyright 1996,
2000 Digital Theater Systems, Inc. All rights reserved.
US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and
other world-wide patents issued and pending.
“DTS”, “DTS-ES Extended Surround” and “Neo:6” are
trademarks of Digital Theater Systems, Inc. Copyright 1996,
2000 Digital Theater Systems, Inc. All rights reserved.