Sharp CD-SW300 User Manual

 

03/12/17

CD-SW300 02-14.fm

 

CD-SW300

  

 

Placing the antenna on the unit or near the AC power cord may
cause noise pickup. Place the antenna away from the unit for better
reception.

  

 

Connect the black wire to the FRONT SPEAKERS minus (-) termi-
nal, and the red wire to the FRONT SPEAKERS  plus (+) terminal.

 

1. Connect the black wire to the SUBWOOFER minus (-) terminal,   
    and the red wire with purple insulation tube to the SUBWOOFER
    plus (+) terminal.

2. Connect the subwoofer light-up wire to the SUBWOOFER    
    LIGHT-UP jack.

  

 

Connect the speaker light-up wires to the SPEAKERS LIGHT-UP
jacks for speaker illumination. To turn off the speaker light-up
feature, press the CLEAR/DIMMER button on the remote control for
2 seconds or more.

 

  

Placing the right speaker light-up wire to the RIGHT jack and the left
speaker light-up wire to the LEFT jack.

 

:  

 

Connect the FM antenna wire to the 
FM 75 OHMS jack and position the FM 
antenna wire in the direction where the 
strongest signal can be received.

 

Connect the AM loop antenna to the 
AM and GND terminals. Position the 
AM loop antenna for optimum 
reception. Place the AM loop antenna 
on a shelf, etc., or attach it to a stand 
or a wall with screws (not supplied).

< Assembling >

< Attaching to the wall >

 

Wall   Screws (not supplied)

Red
Black

Purple

  

Never mistake the FRONT SPEAKERS and the SUBWOOFER 
terminals. The unit or the speakers may be damaged.

  

If you use other speakers with an impedance lower than that 
specified, the unit may be damaged. Front speakers: 6 ohms, 
Subwoofer: 12 ohms.

  

Do not mistake the right and the left 
channels. The right speaker is the one on 
the right side when you face the unit.

  

  

Do not stand or sit on the speakers. You may 
be injured.

  

Do not allow any objects to fall into or to be 
placed in the bass reflex duct.