Sharp CD-SW300 User Manual

 

03/12/17

CD-SW300 02-14.fm

 

CD-SW300

  

 

There is no distinction between the right and left speakers.

 

The speaker grilles are not removable.

After checking all the connections have been made correctly, plug
the AC power cord of this unit into the AC outlet. If you plug in the
unit first, the unit will enter the demonstration mode.

The unit will start the tape initialization when plugged in to the AC
outlet. During this process, initializing sound will be heard and the
unit cannot be turned on. Wait until the process is finished.
Unplug the AC power cord from the AC outlet if the unit will not be
in use for a prolonged period of time.

 

Use an outdoor FM antenna if you require better reception. Consult
your dealer.

Note:
When an outdoor FM antenna is used, disconnect the supplied FM
antenna wire.

Cooling fan:
The main unit is built with a cooling fan at the rear of the unit for 
improved cooling. Please do not cover the opening of the fan with 
any obstacles, as this will block proper ventilation.

Table

Floor

Left speaker Main unit Right speaker

Subwoofer

The first time the unit is plugged in, the 
unit will enter the demonstration mode. 
You will see words scroll and the sub-
woofer will light up in flashing mode.

To cancel the demonstration mode:
When the unit is in the power 
stand-by mode (demonstration 
mode), press the X-BASS (SUR-
ROUND)/DEMO button. The unit 
will enter the low power consump-
tion mode and the subwoofer light 
up will be off.
 
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS 
(SURROUND)/DEMO button again.
 
Note:
When the power is on, the X-BASS (SURROUND)/DEMO button can 
be used to select the extra bass mode.

Outdoor 
FM antenna

75 ohms
coaxial cable