Manualsbrain.com
  1. Manuals
  2. Brands
  3. Anchor Audio
  4. AN-100CMF1+
  5. User Manual

Anchor Audio AN-100CMF1+ User Manual

Download
Page of 6
MADE IN USA
SIX YEAR WARRANTY
AN-1000X+ Speaker Monitor Owners Manual
AN-1000X+ TECHNICAL SPECIFICATIONS
(Specifications Subject to Change Without Notice)
Anchor Audio customer service
800.262.4671
For AdditionAL inFormAtion 
visit www.anchoraudio.com 
6
Rated Power Output 
50 watts continuous @ 4
W
Max SPL @ Rated Power  107 dB @ 1 meter
Frequency Response 
65 Hz – 20 kHz ± 3 dB
Speaker Type 
4.5” woofer with shielded magnet, 
 
10mm dome tweeter
AC Power Reqs. 
110 – 125Vac, 50/60 Hz, 90W 
Max 
     Export Model 
208 – 240Vac, 50/60 Hz, 90W 
Max
Dimensions 
(HWD)
 
5.25” x 8.4” x 9”  
 
(13 x 21 x 23 cm)
Weight 
9.5 lbs / 4.3 Kg
Tone Controls
Bass 
+8 – 12 dB @ 100 Hz
Treble 
+10 – 12 dB @ 10 kHz
 
Inputs
Balanced 
female XLR, switchable phantom  
 
power, 15 volts DC @ 6.8 k
W
Mic-Level Setting 
Lo-Z
Line-Level Setting 
Bridging (10 k
W)
Line 
Hi-Z, unbalanced, 1/4”-phone & 
RCA
Outputs
Line (post fader) 
Lo-Z, buffered, RCA
Speaker 8
W, unswitched, 1/4”-phone
Sensitivity For Rated Output
Line 
balanced -18 dBv (125 mVrms)
Microphone 
balanced -56 dBv (1.5 mVrms)
Line 
-18 dBv (125 mVrms)
HAVING TROUBLE WITH YOUR SOUND SYSTEM? 
CONDITION 
POSSIBLE CAUSE
No Sound 
(Power LED Not Lit)
 
• turn POWER switch on
 
• plug in power cord
 
• check for blown fuse
No Sound 
(Power LED Lights)
 
• check for output from source
 
• make sure all cables are completely plugged in
 
• increase volume control
Distorted Sound 
• check input cable connection
 
• lower input signal level
Excessive Hum / Noise 
• use shielded input cable
Mic Volume Too Low 
• set balanced input to mic-level
Blows Fuse w/ Auxiliary Speaker 
• shorted speaker cable
HAVING TROUBLE WITH YOUR WIRELESS SYSTEM? 
(Wireless Model Only)
No Sound 
• confirm transmitter power switch is set to on
 
• turn up volume control
 
• plug microphone into body-pack transmitter
 
• turn sound system on
 
• replace mic/transmitter battery
 
• make sure hands free mic cable is fully plugged into transmitter
 
Frequent Transmitter Dropouts 
• replace mic/transmitter battery
 
• move mic/transmitter closer to AN-1000XF1+
• change transmitter to different channel