Denon AVR-4806CI User Manual
136
Advanced Setup – Part 2
Check the parameter
1
Press the
CURSOR
D
D or H
H button to select
“Parameter Check” at the “Auto Setup / Room
EQ” menu, then press the
EQ” menu, then press the
ENTER
button.
• Display the “Parameter Check” screen.
• The results of the measured items can be checked.
• The EQ parameters that were set in Auto Setup can be
• The EQ parameters that were set in Auto Setup can be
checked.
• This item is displayed, after the measurement result of the
“Auto Setup / Room EQ” is decided.
2
Press the
CURSOR
D
D or H
H button to select the
items, then press the
ENTER
button.
• Display the verification screen.
For instructions on checking the results of each item
(
(
page 24).
3
Press the
CURSOR
D
D or H
H button to select “EQ
Parameter Check”, then press the
ENTER
button.
• Display the “EQ Parameter Check” screen.
4
Press the
CURSOR
D
D or H
H button to select the
Equalizer curve, then press the
ENTER
button.
• Display the “EQ Check” screen.
The display is only an approximate picture of the
response and that correction is happening at all
frequencies.
response and that correction is happening at all
frequencies.
5
Press the
CURSOR
F
F or G
G button to select the
speaker channel.
6
If the check ends, pressing the
CURSOR
D
D or H
H
button to select “Exit”, then press the
ENTER
button.
• The “EQ Parameter Check” screen reappears.
7
Press the
CURSOR
D
D or H
H button to select
“Exit”, then press the
ENTER
button.
• The “Parameter Check” screen reappears.
The results of the “Auto Setup” procedure can
be reset even if the settings have been changed
after performing the “Auto Setup” procedure:
Press the
be reset even if the settings have been changed
after performing the “Auto Setup” procedure:
Press the
CURSOR
D
D or H
H button to select
“Restore Yes 0”, then press the
CURSOR
F
F
button.
8