Denon AVR-4806CI User Manual
134
Advanced Setup – Part 2
Setting the Room EQ Setup
1
Press the
CURSOR
D
D or H
H button to select
“Room EQ Setup” at the “Auto Setup / Room
EQ” menu, then press the
EQ” menu, then press the
ENTER
button.
• Display the “Room EQ Setup” screen.
• Select the setting of an Equalizer that has been set with Auto
Setup or Manual EQ.
All:
Sets the Equalizer for all surround modes.
Assign:
Sets the Equalizer individually for each surround
mode.
mode.
2
Press the
CURSOR
F
F or G
G button to select
“All” or “Assign”.
3
-1
When “All” is selected:
q Press the
q Press the
ENTER
button.
• Display the “Select the EQ Curve” screen.
3
-2
When “Assign” is selected:
After completing system setup, select the
desired equalizer setting pressing the
After completing system setup, select the
desired equalizer setting pressing the
ROOM
EQ
button.
• Equalizer settings for the individual surround modes
can be stored in the memory.
Whenever the ROOM EQ button is pressed, the display
switches as shown below.
switches as shown below.
Flat:
Adjusts the frequency response of all speakers to
the flattest response. This mode is suitable for
multi-channel music surround sound sources.
the flattest response. This mode is suitable for
multi-channel music surround sound sources.
Manual:
Selects the setting value that was set in the Manual
EQ Setup.
For details of the “Manual EQ Setup” (
EQ Setup.
For details of the “Manual EQ Setup” (
page
113, 114).
OFF
Audyssey
Flat
Manual
Front
Front:
Adjusts the frequency response of the surround
speakers to match the characteristics of the front
channel speakers.
speakers to match the characteristics of the front
channel speakers.
4
Press the
ENTER
button to enter the setting.
• The “Auto Setup / Room EQ” menu reappears.
Others Setup
• The Equalizer setting of “Audyssey”, “Front” and “Flat” can
be selected after performing the Auto Setup.
• When the speaker set as “None” with the Auto Setup is
changed to on manually, the equalizer of “Audyssey”,
“Front” and “Flat” cannot be used.
“Front” and “Flat” cannot be used.
• The Equalizer setting can be selected directly by ROOM EQ
button.
• When headphones are connected, the Room EQ cannot be
used.
w Press the
CURSOR
F
F or G
G button to select
the equalizer setting.
OFF:
The Equalizer is not used.
Audyssey:
Adjusts the frequency response of all speakers to
correct the effects of room acoustics.
correct the effects of room acoustics.