JVC CA-DXJ35 User Manual

 

• For JPEG playback...

– This System can play back JPEG files with the extension 

code <.jpg> or <.jpeg> (regardless of the letter case—
upper/lower).

– It is recommended that you record a file at 640 x 480 

resolution. (If a file has been recorded at a resolution of 
more than 640 x 480, it will take a long time to be 
shown.) 

– This System can play only baseline JPEG files*. 

Progressive JPEG files* or lossless JPEG files* cannot 
be played.
* Baseline JPEG format:

Used for digital cameras, 
web, etc. 

Progressive JPEG format: Used for web.   
Lossless JPEG format:

An old type and rarely used 
now.

• For MPEG-1/MPEG-2 playback...

– This System can play back MPEG-1/MPEG-2 files with 

the extension code <.mpg> or <.mpeg> (regardless of the 
letter case—upper/lower).

– The stream format should conform to MPEG system/

program stream.

– 720 x 576 pixels (25 fps)/720 x 480 pixels (30 fps) is 

recommended for the highest resolution.

– This System also supports the resolutions of 352 x 576/

480 x 576/352 x 288 pixels (25 fps) and 352 x 480/480 x 
480/352 x 240 pixels (30 fps).

– The file format should be MP@ML (Main Profile at 

Main Level)/SP@ML (Simple profile at Main Level)/ 
MP@LL (Main Profile at Low Level).

– Audio streams should conform to MPEG1 Audio 

Layer-2 or MPEG2 Audio Layer-2.

• For ASF playback...

– This System can play back ASF files with the extension 

code <.asf> (regardless of the letter case—upper/lower).

– This System supports ASF files whose resolution is 

352 x 288 pixels or less.

– Some recorded files may not be able to played back 

depending on file characteristics, kind of digital still/ 
video cameras, or recording conditions.

• For DivX playback...

– The System supports DivX 6.x, 5.x, 4.x and 3.11.
– When making a disc, use the UDF-Bridge format. 

“Multi-border” is not supported.

– The System supports DivX files whose resolution is 720 

x 480 pixels or less (30 fps), and 720 x 576 pixels or less 
(25 fps).

– Audio stream should conform to Dolby Digital, MPEG1 

Audio Layer- 2 or MPEG Audio Layer-3 (MP3).

– This System can play back DivX files with the extension 

code <.divx> <.div> <.avi> (regardless of the letter 
case—upper/lower).

– The System does not support GMC (Global Motion 

Compression).

– The file encoded in the interlaced scanning mode may 

not be played back correctly.

 

• The channel level cannot change during Mic Mixing, 

Vocal Masking or Karaoke Scoring.

 

• You cannot adjust the Active Bass level when the 

headphones are connected.

 

• If you plug in a microphone and Mic Mixing is activated, 

the System will automatically switches the mode to 
LITE.n.EASY even if the mode is set to OFF.

 

• When you unplug the AC power cord or if a power failure 

occurs, the User Mode settings may be erased in a few 
days. If this happens, set the User Modes again.

 

• Dolby Pro Logic II Modes: Dolby Pro Logic II Mode is a 

multi-channel playback format to convert 2-channel 
sources into 5.1-channels. Dolby Pro Logic II reproduces 
spacious sound from original sound without adding any 
new sounds or tonal colorations.

• While you use the headphones, the Surround Mode is 

canceled temporarily.

• Some DVD Audio discs prohibit downmix. While playing 

back such a disc...
– You cannot change the Surround Mode. 
– The System plays back the left front and right front 

signals when you have selected “STEREO” for the 
Surround Mode or when you use the headphones. 

• Dolby PL II MUSIC/MOVIE take no effect to MPEG-1/

MPEG-2/ASF/DivX files.

 

•  “0:00” will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this 

happens, reset the clock.

 

• On some disc/file, you cannot change audio languages 

while playing back.

 

• You cannot select a track in the bonus group for Program 

Play.

 

• During slow-motion playback, no sound will be 

reproduced.

• While zoomed in, the picture may look coarse.

DX-J35[U].book Page 41 Thursday, April 26, 2007 4:41 PM