JVC CA-DXJ35 User Manual
42
Advanced Playback Operations
(see pages 20
to 22)
Programming the Playing Order—Program Play:
– While programming steps...
Your entry will be ignored if you have tried to program
an item number that does not exist on the disc (for
example, selecting track 14 on a disc that only has 12
tracks).
an item number that does not exist on the disc (for
example, selecting track 14 on a disc that only has 12
tracks).
– For SVCD/VCD/CD loaded on the other tray than the
current one, the System may prompt for the group
number entry as well; however, these entries will be
ignored during playback.
number entry as well; however, these entries will be
ignored during playback.
• The programmed contents will remain until you erase it.
• While the PROGRAM indicator is on, you cannot change
• While the PROGRAM indicator is on, you cannot change
the disc to play. (DISC 1 – 5 on the remote control and
DISC 1 – 5
DISC 1 – 5
#
on the main unit do not work.)
On-Screen Operations
(see pages 23 to 28)
Operations Using the On-screen Bar:
• A-B Repeat is possible only within the same title or within
the same track.
Recording Operations
(see pages 29 to 30)
General:
• You cannot change the source during recording.
• There is leader tape which cannot be recorded onto at the
• There is leader tape which cannot be recorded onto at the
start and the end of cassette tapes. Thus, before recording,
wind the leader tape first to ensure that the recording will
be made without any music part lost.
wind the leader tape first to ensure that the recording will
be made without any music part lost.
• If no cassette is inserted or a protected tape has been
inserted, “NO REC” appears on the display.
• The recording level is automatically set correctly. Thus,
you can make sound adjustments other than Surround
Mode. without affecting the recording level.
Mode. without affecting the recording level.
Recording onto a Tape:
• While recording disc/USB mass storage class device,
plugging in and out headphones may cause sound
distortion and affect the recording.
distortion and affect the recording.
• When using Reverse Mode for recording, start recording in
the forward (
3
) direction first; otherwise, recording will
stop when only one side (reverse) of the tape is recorded.
Synchronized Recording:
• You cannot open the disc tray while recording onto a tape
using USB/DISC REC START button.
• Recording starts from the first track even if you have
selected a track by using
4
/
¢
. To specify track(s) to
record, program them (not applicable for USB mass
storage class device) or use One Track Recording.
storage class device) or use One Track Recording.
• While recording, you cannot use disc/USB mass storage
class device operation buttons (except for
7
).
• You cannot use Repeat Play during synchronized
recording (Repeat Play will be canceled).
• USB/DISC REC START button does not work:
– While playback is paused.
– When Random Play mode is selected.
– When playing back in Program Play mode.
– When Random Play mode is selected.
– When playing back in Program Play mode.
• When using Reverse Mode and the tape reaches its end in
the forward direction (
3
) during recording, the last song
will be re-recorded at the beginning of the reverse side (
2
).
• When using Reverse Mode and the tape reaches its end in
the reverse side (
2
) during recording, recording stops even
though the disc/USB mass storage class device is not
entirely recorded.
entirely recorded.
Enjoying Karaoke
(see pages 31 to 34)
General:
• When Mic Mixing or Vocal Masking is activated:
– Multi-channel source will be down-mixed.
– Dolby Pro Logic II will be canceled temporarily.
– Dolby Pro Logic II will be canceled temporarily.
• When Mic Mixing is activated and ALL CH ST is selected
as the Surround mode, the output level of surround speaker
decreases.
decreases.
• While recording onto a tape, Key adjustment, Echo and
Vocal Masking will be recorded. However, while
recording onto a tape using USB/DISC REC START, Key
adjustment will not be recorded.
recording onto a tape using USB/DISC REC START, Key
adjustment will not be recorded.
• While the System is turned on, connecting a microphone
automatically activates Mic Mixing and all the Karaoke
related functions.
related functions.
• If you connect a microphone with the System turned off,
press MIC MIX while holding SHIFT to activate Mic
Mixing after turning the System on.
Mixing after turning the System on.
Adjusting the Sound Track for Karaoke:
• On some music, Vocal Masking does not provide the
correct effect.
Scoring Your Karaoke Skill:
• Karaoke Scoring does not work for DVD Audio, but you
can activate or deactivate the function while playing back
DVD Audio.
DVD Audio.
• While Karaoke Scoring is in use, you cannot deactivate
Mic Mixing or use MIC MIX, RESERVE and number
buttons.
buttons.
• Activating Karaoke Scoring cancels Repeat Play.
• You cannot use Karaoke Scoring during Program Play,
• You cannot use Karaoke Scoring during Program Play,
Random Play, or recording. However, you can turn
Karaoke Scoring on and off by using
KARAOKE SCORING button during these play modes.
Karaoke Scoring on and off by using
KARAOKE SCORING button during these play modes.
• The ranking (top 3) is cleared when you turn off the
System.
DX-J35[U].book Page 42 Thursday, April 26, 2007 4:41 PM