JVC CA-DXJ35 User Manual

Power cord

Plug the AC power cord to a wall outlet.

Connecting a USB Mass Storage

Class Device

You can connect a USB mass storage class device such as a
USB flash memory, hard disk drive, multimedia card reader,
digital camera, etc. to this System.

• You cannot connect a personal computer to the

(USB

MEMORY) terminal of the System.

Preparing the Remote Control

• If the range of effectiveness of the remote control decreases,

replace both batteries.

Cancelling the Demonstration

To start the demonstration,

select DEMO START.

Changing the Color System and

Scanning Mode

You can select the video output to match it to the color
system of your TV (NTSC or PAL).
• If you connect a progressive TV through the

COMPONENT jacks, you can enjoy a high quality picture
by selecting progressive scanning mode.

• You can change the setting only while playback is stopped.

Enter the color system setting mode.

Select the color system and scanning mode.

Store the setting.

DO NOT plug in before setting the voltage
selector and all connection procedures are
completed.

When using the remote control,

point the top of the

remote control toward the remote sensor as directly as
possible. If you operate it from a diagonal position, the
operating range (approx. 5 m) may be shorter.

Caution:

Do not expose batteries to heat or flame.

USB cable
(not supplied)

Main unit

R6(SUM-3)/AA(15F)

NTSC / PAL

NTSC or PAL Interlaced
scanning. For a conventional
NTSC or PAL TV.

NTSC PROG/
PAL PROG

NTSC or PAL Progressive
scanning. For a progressive NTSC
or PAL TV.

Main Unit

ONLY

sec.

DEMO OFF

DEMO START

Remote
ONLY

INFO

SCAN MODE

sec.

PAL

PAL PROG

NTSC PROG

NTSC

DX-J35[U].book Page 6 Thursday, April 26, 2007 4:41 PM