Delphi Gateway Systems Analysis INterface Tool (SAINT) User Manual
SAINT
Keyword 2000 to RS-232 Gateway
01/20/04
Page 7 of 20
4.2
Messages IDs
Message IDs are one byte long and have the following general format:
Type (CAN, BEAN,
ACP,Class 2, IIC, etc)
Command (Cmd=1)
Tx (1) / Rx (0)
Time Stamp (TS)
Bits 3 - 7
bit 2
bit 1
bit 0
The upper nibble indicates the type of message. The following types are defined:
•
Gateway (08)
•
Keyword 82 (10h)
•
Keyword 71 (18h)
•
IIC (20h)
•
Keyword 2000 (28h)
•
IDB (30)
•
ACP (38h)
•
E&C (40h)
•
J1708 (48h)
•
CAN (50h)
•
Class2 (60h)
•
Class2 Block (68h)
•
SPI (70h)
•
BEAN1 (90h)
•
BEAN2 (98h)
Bits 3 to 7 identify the specific communication bus (i.e., Class 2, CAN bus, etc.). Bit 2 is used to designate a
command or setup message when set to 1. Bit 1 is the transmit or receive bit with 1 designating transmit and 0
designating receive. Bit 0 is used to designate the Time Stamp. In general, report messages from the gateway use
the same identifiers as commands to the gateway.
command or setup message when set to 1. Bit 1 is the transmit or receive bit with 1 designating transmit and 0
designating receive. Bit 0 is used to designate the Time Stamp. In general, report messages from the gateway use
the same identifiers as commands to the gateway.