Edirol UA-20 User Manual

 

Names of things and what they do

 

This switches the operating mode.

 

The driver included with the UA-20 will be used to record/play/edit audio on 
sequencer software or waveform editing software with high audio quality and 
stable timing. Using the dedicated driver provided on the included CD-ROM, you 
will be able to record, play, and edit audio on your sequencer or waveform editing 
application with high quality and stable timing. Normally, you should use this.

 

Select this mode when using applications that use the audio driver included with 
your operating system, and utilize functionality specific to your operating system.

 

This selects whether or not the signal input to the input jacks will be output to the 
headphone jack and the master output jacks.

 

Set this as appropriate for the device that is connected to the input jacks.

 

These are input jacks for analog audio signals. You can connect dynamic mics, 
guitars, or audio devices. You must set the 

 

 to the position 

appropriate for the device you have connected.
If you connect a guitar or mic only to the L jack or R jack, the signal will be 
monaural.

 

The input signal from the 

 

 will be output to 

the 

 

 and the 

 

.

 

Settings or operations in an ASIO 2.0 compatible applica-
tion such as Cubase will be able to control the monitoring 
setting.

 

The input signal from the 

 

 will not be output 

to the 

 

 or the 

 

.

 

When connecting an audio source or MIDI sound module 
via an analog audio connection

 

When connecting a guitar

 

When connecting a dynamic mic