Sony HVR-1500 User Manual
51
Recording Timecode and User Bit Data
Chapter
Cha
p
te
r
4
Using
Time
Da
ta
4
Using Time Data
Recording Timecode and
User Bit Data
User Bit Data
For timecode recording, there are three methods, as
follows.
Internal preset mode: Set an initial value, and generate a
follows.
Internal preset mode: Set an initial value, and generate a
timecode internally to this unit, which is recorded.
You can select either of the following advance modes.
• Free Run: Timecode advances continually.
• Rec Run: Timecode advances only during
You can select either of the following advance modes.
• Free Run: Timecode advances continually.
• Rec Run: Timecode advances only during
recording.
Internal regeneration mode: Generate a timecode
internally to this unit, to run consecutively from the
timecode already recorded on the tape, and record
this.
timecode already recorded on the tape, and record
this.
External regeneration mode: Generate a timecode
internally to this unit, synchronized to an external
input timecode, and record this. For the external input,
you can select from the timecode input to the
following connectors.
• TC IN connector: LTC
•
input timecode, and record this. For the external input,
you can select from the timecode input to the
following connectors.
• TC IN connector: LTC
•
HDV/DV connector: LTC/VITC (VITC is
available only when the recording format setting of
this unit is DVCAM.)
this unit is DVCAM.)
• SDI IN connector: RP188 SDI embedded timecode
(LTC)
• Video input connectors: VITC (only available when
the recording format setting of this unit is DVCAM)
• For linear editing using an editing control unit, when
using this unit as the recorder, set the timecode recording
mode to Internal Preset, and the advance mode to Free
Run.
mode to Internal Preset, and the advance mode to Free
Run.
• If the recording format is DVCAM and timecode is
recorded discontinuously, you can overwrite the
timecode (or user bit data) from any initial value set on
this unit (TC insert function).
timecode (or user bit data) from any initial value set on
this unit (TC insert function).
For details of TC insert function, see page 68.
Setting the Timecode Initial Value,
and Setting User Bit Data
and Setting User Bit Data
Internal preset mode
You can set the initial timecode value before recording the
timecode generated by the internal TC (timecode)
generator onto a tape. In DVCAM/DV format recording,
you can preset the timecode user bit data, to record such
data as the date, time, scene number, reel number, or other
useful information.
timecode generated by the internal TC (timecode)
generator onto a tape. In DVCAM/DV format recording,
you can preset the timecode user bit data, to record such
data as the date, time, scene number, reel number, or other
useful information.
1
Press the DISPLAY button to set the LCD monitor
display to status display mode or small screen display
mode (see page 16).
display to status display mode or small screen display
mode (see page 16).
2
Press the COUNTER SELECT button to light the time
data type indicator TC or UB.
data type indicator TC or UB.
TC: To set the initial timecode value
UB: To set user bit data
UB: To set user bit data
The current timecode value or user bit data is shown in
the time counter display.
the time counter display.
Notes
PRESET
VARIABLE
REC
PB
LEVEL
MONITOR
SELECT
COUNTER
SELECT
PHONES
CONTROL-S
REW
PLAY
F FWD
i.LINK
1
2
VIDEO
3
A
B
CH1 1/2
4
CH2 3/4
REC
STOP
EJECT
LOCAL
i.LINK
HDV DVCAM
(DV)
9PIN
INPUT SELECT
REC/PB LEVEL
POWER
DISPLAY
MENU
RESET(NO)
SET(YES)
TC
PRESET
ASSIGN
0
-12
-20
-30
-40
-60
TC
VITC
OVER
CH
2
EDIT MODE
CH
1
OVER
REPEAT
60i
720 30p 720 60p
01:23:45:15
48K
5,6,7
2
3,8
3
1
4