Sony MEX-BT5000 User Manual
15
Notes
• While connecting to a Bluetooth device, this unit
• While connecting to a Bluetooth device, this unit
cannot be detected from another device. To be
detected, disconnect the current connection and
search for this unit from another device.
detected, disconnect the current connection and
search for this unit from another device.
• Depending on the device, searching from this unit
may not be possible. In this case, search for this unit
from the connecting device.
from the connecting device.
• If you search for this unit and the connecting device
mutually at the same time, this unit will not recognize
the connecting device.
the connecting device.
• It may take time to search or connect.
• Depending on the device, the confirmation display of
• Depending on the device, the confirmation display of
the connection appears before inputting the
passcode.
passcode.
• The time limit for inputting the passcode differs
depending on the device.
• This unit can register up to 6 devices each for
handsfree and audio devices.
• This unit cannot be connected to a device that
supports only HSP (Head Set Profile).
Connecting to registered devices
Devices are registered once paired and connected
with this unit. You can select the registered
device and connect it.
with this unit. You can select the registered
device and connect it.
1
Press (Bluetooth).
The Bluetooth function menu appears.
The Bluetooth function menu appears.
2
Select “Connectivity”
c “Handsfree
Devices” or “Audio Devices.”
The list of registered devices appears.
The list of registered devices appears.
3
Select the device to connect.
4
Select “Connect.”
“Connected” appears and connection is
complete.
“
“Connected” appears and connection is
complete.
“
” or “
” appears during connection.
To stop the connection
Select “Disconnect”
c “yes” in step 4.
Tip
Depending on the device, it may be possible to select
this unit from the device, and then connect.
Depending on the device, it may be possible to select
this unit from the device, and then connect.
Handsfree talking
Notes
• For details on operation when a cellular phone with
• For details on operation when a cellular phone with
Bluetooth audio streaming function is connected as
an audio device, see “Listening to music from an
audio device” on page 17.
an audio device, see “Listening to music from an
audio device” on page 17.
• The microphone of this unit is located on the rear of
the front panel (page 10). Do not mask the
microphone with tape, etc.
microphone with tape, etc.
• Even if you activate the ATT function during a call,
the outgoing sound will not be attenuated.
Making calls
You can make a call from the connected cellular
phone by operating this unit.
phone by operating this unit.
1
Press (CALL).
The CALL menu appears.
The CALL menu appears.
2
Select the items in the following order,
then press the joystick to start calling.
then press the joystick to start calling.
CALL menu
* If you set “Security” (page 18), “Security Locked”
appears and operation is not possible.
Dialed Calls*
Selects from the dialed call history. (Maximum
storable name and phone numbers: 10)
storable name and phone numbers: 10)
Name and phone number to call
c “Call”
Select “Delete” to delete the name and phone
number, “Delete All” to clear the history.
number, “Delete All” to clear the history.
Received Calls*
Selects from the received call history.
(Maximum storable name and phone
numbers:10)
(Maximum storable name and phone
numbers:10)
Name and phone number to call
c “Call”
Select “Delete” to delete the name and phone
number, “Delete All” to clear the history.
number, “Delete All” to clear the history.
Phonebook*
Selects from the phonebook list. (Maximum
storable name and phone numbers: 50)
storable name and phone numbers: 50)
“Contact List”
c Name to call c the name and
phone number
For details on how to store in the phonebook,
see “Using the Phonebook” on page 16 and
“Setting a handsfree device” on page 17.
see “Using the Phonebook” on page 16 and
“Setting a handsfree device” on page 17.
Dial
Inputs the phone number using the joystick or
card remote commander.
To input “+,” press and hold the 0 button on the
card remote commander.
card remote commander.
To input “+,” press and hold the 0 button on the
card remote commander.
Preset Dial*
Selects the phone number stored in a number
button.
button.
Preset number (P1 – P6)
c “Call”
For details on how to store in the number
buttons, see “Using the Preset Dial” on page 17.
buttons, see “Using the Preset Dial” on page 17.
continue to next page
t