Sony XA-V7W User Manual
7
Installation procedure
Mounting example
When installing this unit, be sure to close the monitor of the unit.
If the monitor is opened while installing and given too much
force, it may cause a malfunction.
When installing this unit, be sure to close the monitor of the unit.
If the monitor is opened while installing and given too much
force, it may cause a malfunction.
1
2
3
4
q;
6
9
9
6
9
6
7
qa
qs
qd
q;
Bend these claws outward
for a tight fit, if necessary.
for a tight fit, if necessary.
Dashboard
182 mm
53 mm
Fire wall
Notes
• Do not press the front panel buttons of
the unit during installation and do not
apply strong force.
apply strong force.
• Do not place any objects on top of the
unit.
• Be sure to use only the supplied pan-
head screws 6 for installation. If any
other screws are used, make sure they
conform to the requirements shown
below.
Using longer screws can cause internal
damage to the unit.
other screws are used, make sure they
conform to the requirements shown
below.
Using longer screws can cause internal
damage to the unit.
5 mm
6 mm
Damage can also occur if the screws are
used directly on the unit without the
brackets of the factory-installed car
stereo.
used directly on the unit without the
brackets of the factory-installed car
stereo.
When removing front panel plate
Front panel
plate 4
plate 4
Do not throw away the front panel plate,
since it will be needed when you change
the car you install the unit.
For details, see “Removing the Front
Panel Plate”. (page 17).
since it will be needed when you change
the car you install the unit.
For details, see “Removing the Front
Panel Plate”. (page 17).