JL Audio SB-F-Edg/10W3v3 User Manual
Continued on Next Page
SB-F-EDG/10W3v3_INSTR_SKU# 011254
s t e P 7
Remove passenger side cargo panel by prying away from
side of vehicle and floor.
Remove passenger side cargo panel by prying away from
side of vehicle and floor.
s t e P 6
Pull passenger side cargo panel away from the door jamb.
Pull passenger side cargo panel away from the door jamb.
s t e P 5
Remove passenger side threshold plate.
Remove passenger side threshold plate.
s t e P 4
Fold passenger side rear seat forward.
Fold passenger side rear seat forward.
Remove bolt securing seat belt at lower front of cargo
side panel.
side panel.
Page 2 • JL Audio, Inc 2008
S T E P 9
Carefully pry taillight assembly out, then back, from vehicle,
releasing two alignment pins at the front edge.
Carefully pry taillight assembly out, then back, from vehicle,
releasing two alignment pins at the front edge.
Remove bulbs from assembly by turning 1/4 turn to the left.
S T E P 1 1
Unpack Stealthbox® and install mounting stud into threaded
insert so that 1/2 to 3/4 inch extends from enclosure.
Unpack Stealthbox® and install mounting stud into threaded
insert so that 1/2 to 3/4 inch extends from enclosure.
S T E P 1 0
Route woofer wiring to passenger side rear of cargo area.
Route woofer wiring to passenger side rear of cargo area.
S T E P 8
Remove passenger side taillight assembly by removing
(2) 8mm screws.
Remove passenger side taillight assembly by removing
(2) 8mm screws.