JL Audio SB-S-IMPRZA/10W6v2 Leaflet

SB-S-IMPRZA/10W6v2_INSTR_SKU#011218

SB-S-IMPRZA/10W6v2_INSTR_SKU#011218

C O N G R A T U L A T I O N S
You have completed the installation for this model!

Please refer to the Power Recommendation section for an 
amplifier recommendation and basic set-up help.

S T E P   6
Carefully guide the socket cup set screw through the cuts 
made in the carpeting and the enlarged hole. 

From under the vehicle, apply supplied fender washer, flat 
washer, lock washer and hex nut onto the exposed socket 
cup set screw and secure.  

Note: For added protection it is recommended that 
you apply a bead of silicone between the vehicle and 
the fender washer. After the bolt assembly is tightly 
secured, it is also recommended that vehicle under-
coating material is applied to the exposed assembly. 

S T E P   5
Place the Stealthbox® into the trunk. Run speaker wire 
from the amplifier location to the Stealthbox® and attach 
to the terminal. 

Check the woofer for proper operation.

Thread in the supplied socket cup set screw into the bottom 
of the Stealthbox®, leaving 1-1/2-inches exposed. 

S T E P   4
Flip the thin carpet back into place. Feel for the hole enlarged 
in STEP 3 and cut the thin carpet at the hole.

Place the heavy carpet flooring back into the trunk. Feel for 
the hole enlarged in STEP 3 and cut the flooring at the hole.

Page 3 • JL Audio, Inc 2006

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered 
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc. 

6   •  Printed in USA  •  ©2005 JL Audio, Inc.  •  U.S. PATENTS:  #5,734,734  #5,949,898  #6,118,884  #6,229,902  

#6,243,479  #6,294,959  #6,501,844  #6,496,590  #6,441,685  #5,687,247  #6,219,431  #6,625,292  #D472,891  #D480,709  Other U.S. & Foreign 
patents pending. For more detailed information please visit us online at www.jlaudio.com.

(954) 443-1100

1 0 3 6 9   N O R T H   C O M M E R C E   P A R K W A Y     •     M I R A M A R ,   F L O R I D A     •     3 3 0 2 5     •     U S A

(1)

(1) 3/8-inch-16 x 2-1/4-inch Socket Cup Set Screw 

 3/8-inch-16 x 2-1/4-inch Socket Cup Set Screw 

(1)

(1) 3/8-inch -16 Hex Nut

 3/8-inch -16 Hex Nut

(1)

(1) 3/8-inch USS Flat Washer 

 

                    

 3/8-inch USS Flat Washer 

 

                    

(1)

(1) 3/8-inch x 2-inch Fender Washer 

 

 

 3/8-inch x 2-inch Fender Washer 

 

 

(1)

(1) 3/8-inch Split Lock washer

 3/8-inch Split Lock washer

Enclosure Type: Acoustic Suspension (sealed)

Acoustic Suspension (sealed)

Driver Type: 10W6v2-D4

10W6v2-D4

Nominal Impedance: 2 ohms mono

2 ohms mono

Continuous Power Handling: 400 Watts

400 Watts

JL Audio recommends using a high quality amplifier such as the JL Audio A1400.  
The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the A1400 when 
being used to power your Stealthbox

®

.

Input Voltage

Low | High

CH 1 (Left)

Input Sens.

LP Filter

Filter Freq. (Hz)

40

45

55

65

80

100

200

Bass Boost

Remote

Bass Port

Power

Protect

CH 2 (Right)

The JL Audio A1400 is a very versatile audio component.  Please consult the owner’s manual for even more 
detailed information about installing and tuning this amplifier.

A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.

Front Speaker Size / Location: 6.5-inch / Front Doors*

6.5-inch / Front Doors*

Fits JL Audio Models: TR, VR & XR650-CXi, TR,VR,XR,ZR650-CSi  
*All speakers require spacers for installation

*All speakers require spacers for installation

Rear Speaker Size / Location: 6.5-inch / Rear Deck*

 6.5-inch / Rear Deck*

Fits JL Audio Models: TR, VR & XR650-CXi

 TR, VR & XR650-CXi

*All speakers require spacers for installation

*All speakers require spacers for installation