Mitsubishi Electronics MR-J2-03A5 User Manual
2 - 1
2. INSTALLATION
2. INSTALLATION
CAUTION
y Stacking in excess of the limited number of products is not allowed.
y Install the equipment to incombustible. Installing them directly or close to
y Install the equipment to incombustible. Installing them directly or close to
combustibles will led to a fire.
y Install the equipment in a load-bearing place in accordance with this Instruction
Manual.
y Do not get on or put heavy load on the equipment to prevent injury.
y Use the equipment within the specified environmental condition range.
y Provide an adequate protection to prevent screws, metallic detritus and other
y Use the equipment within the specified environmental condition range.
y Provide an adequate protection to prevent screws, metallic detritus and other
conductive matter or oil and other combustible matter from entering the servo
amplifier.
y Do not block the intake/exhaust ports of the servo amplifier. Otherwise, a fault may
occur.
y Do not subject the servo amplifier to drop impact or shock loads as they are
precision equipment.
y Do not install or operate a faulty servo amplifier.
y When the product has been stored for an extended period of time, consult
y When the product has been stored for an extended period of time, consult
Mitsubishi.
2.1 Environmental conditions
Environment
Conditions
0 to +55 [
°
C] (non-freezing)
Ambient temperature
32 to +131 [
°
F] (non-freezing)
Ambient humidity
90%RH or less (non-condensing)
−
20 to +65 [
°
C] (non-freezing)
storage temperature
−
4 to +149 [
°
F] (non-freezing)
storage humidity
90%RH or less (non-condensing)
Ambient
Indoors (no direct sunlight)
Free from corrosive gas, flammable gas, oil mist, dust and dirt
Free from corrosive gas, flammable gas, oil mist, dust and dirt
Altitude
Max. 1000m (3280 ft) above sea level
5.9 [m/s
5.9 [m/s
2
] {0.6G} or less
Vibration
19.4 [ft/s
2
] or less