Panasonic CQ-C1100W User Manual

w

8

9

[l TUNE]: Higher frequency
[k TUNE]: Lower frequency

Press and hold ...
[l TUNE]: Higher frequency
[k TUNE]: Lower frequency
Tuning will automatically stop when the signals of the next broadcast station are received.

Press [SRC] (source) to change to the radio mode.

Your favorite FM/AM radio station can be memorized in the [D·M] button and you can call back radio stations
just by pressing the button whatever the current sound source is, even if the power is off.

Default : FM 87.5 MHz

Press [BAND] to change the band.

Press [D·M]. (Press again to cancel)
¡The direct memoried station is received.

FM Stereo indicator

e Release [D·M] button. Then, new station will be over-

written on existing saved station.

 Press and hold [D·M] until the Frequency display blinks.

 Select the station in Radio mode (

➡

blinks

Press [BAND] to select a desired band. (

➡

page 8)

Up to 6 stations each can be saved in the FM1, FM2,
FM3 and AM preset station memories.

Note: Existing saved stations are overwritten with
new stations after following this procedure.

Press [DISP] (display) to switch to the clock display.

Caution: To ensure safety, never attempt to preset
stations while you are driving.

 Use manual or seek tuning to find a station.

(

➡

page 8)

 Press and hold one of the preset buttons

from [1] to [6] until the display blinks once.

Press and hold [BAND] (APM: auto preset memory) for more than 2 seconds.
• The 6 stations with good reception will be automatically saved in the memory

under preset buttons from [1] to [6].

• Once set, the preset stations are sequentially scanned for 5 seconds each.

Press the corresponding preset button from [1] to
[6] to tune in a preset station.

q

blinks once

D·M indicator

Frequency

Clock display