Faber M1600 User Manual

32  •  Operational Reference 

 

Device Vendor 

For the Genie Monochrome series, this is always DALSA. 

Device Model Name 

Displays the device model name (for example, Genie M640). 

Device Version 

Displays the device version. 

Firmware Version 

Displays the currently loaded firmware version. 

Device ID 

Displays the camera serial number.  

MAC Address 

Displays the unique MAC (Media Access Control) address of the Genie camera.  

Device User ID 

Specifies a user written ID, of up to 15 characters, for the Genie camera.  
By default, this field is set to the serial number of the camera. 

Power-up Configuration 

Click Setting to open the Power-up configuration dialog box which allows you to specify 
camera power-up configuration. For more information, see 

"

" on page 

32

. 

 

The Power-up configuration dialog allows you to specify the camera configuration to load when powering-up the 
camera. The Genie camera flash memory contains two possible configuration settings; the Factory Default, and a 
user-defined Camera Configuration 1. The Camera Power-up configuration drop-down list box allows you to 
select either the Factory Default or a user specified camera configuration file. To save the current CamExpert 
settings to the camera user-defined (Camera Configuration) setting, click Save. To view in CamExpert a camera 
configuration file currently saved in the camera, select the configuration file in the Load configuration from 
Camera drop-down list, and click Load. See 

" on page 67

 for a list of the saved 

parameters.