Lorex Technology LW2110 User Manual

3

Connecting The Camera

Connecting The Camera

Use the included mounting screws to mount the stand to the mounting surface: 
• Mark the position of the screw holes on the wall
• Drill holes and insert the drywall plugs as needed
• Firmly attach the stand to the wall using the provided screws

• Before you install the camera, carefully plan where and how it will be 

positioned, and where you will route the cable that connects the camera 
to the power adapter.  

• Before starting permanent installation, verify its performance by 

observing the image on a monitor when camera is positioned in the 
same location/position where it will be permanently installed. 

• Aim the Cameras to best optimize the viewing area: Select a location 

for the camera that provides a clear view of the area you want to 
monitor, which is free from dust, and is not in line-of-sight to a strong 
light source or direct sunlight.

• Avoid installing the cameras where there are thick walls or 

obstructions between the Cameras and the Receiver*.

• Select a location for the camera that has an ambient temperature 

between 14°F~122°F (-10°C~50°C)

• For outdoor use, installation under a shelter is recommended.

*Avoid installing in a location which requires the wireless signal to pass through cement, 
concrete, and metal structures. This will reduce the range of transmission. 

For details, see “Appendix C: Facts About Digital Wireless Cameras” on page 11.