Справочник Пользователя для Lorex Technology LW2110
3
Connecting The Camera
Connecting The Camera
Camera Setup
To install the camera:
1
Use the included mounting screws to mount the stand to the mounting surface:
• Mark the position of the screw holes on the wall
• Drill holes and insert the drywall plugs as needed
• Firmly attach the stand to the wall using the provided screws
• Mark the position of the screw holes on the wall
• Drill holes and insert the drywall plugs as needed
• Firmly attach the stand to the wall using the provided screws
• Before you install the camera, carefully plan where and how it will be
positioned, and where you will route the cable that connects the camera
to the power adapter.
to the power adapter.
• Before starting permanent installation, verify its performance by
observing the image on a monitor when camera is positioned in the
same location/position where it will be permanently installed.
same location/position where it will be permanently installed.
Installation Warnings
• Aim the Cameras to best optimize the viewing area: Select a location
for the camera that provides a clear view of the area you want to
monitor, which is free from dust, and is not in line-of-sight to a strong
light source or direct sunlight.
monitor, which is free from dust, and is not in line-of-sight to a strong
light source or direct sunlight.
• Avoid installing the cameras where there are thick walls or
obstructions between the Cameras and the Receiver*.
• Select a location for the camera that has an ambient temperature
between 14°F~122°F (-10°C~50°C)
• For outdoor use, installation under a shelter is recommended.
*Avoid installing in a location which requires the wireless signal to pass through cement,
concrete, and metal structures. This will reduce the range of transmission.
concrete, and metal structures. This will reduce the range of transmission.