Lucent Technologies 8.2 User Manual
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing phones
38
Adding new phones
3
Gathering necessary information
1. Determine whether the phone is an analog, digital, ISDN, or hybrid set.
You need this information to determine the type of port you need, because
the port type and phone type must match. If you do not know what type of
phone you have, refer to the Type field under
the port type and phone type must match. If you do not know what type of
phone you have, refer to the Type field under
‘‘Station’’ on page 882
for a
list of phones by model number.
2. Record the room location, jack number, and wire number.
You may find this information on the jack where you want to install the
phone, recorded in your system records, or from the technician responsible
for the physical installation.
phone, recorded in your system records, or from the technician responsible
for the physical installation.
3. Display the available boards (cards) and ports.
To view a list of boards on your system, type
list configuration station
and press
RETURN
.
The System Configuration screen shows all the boards on your system that
are available for connecting phones. You can see the board number, board
type, circuit-pack type, and status of each board’s ports.
are available for connecting phones. You can see the board number, board
type, circuit-pack type, and status of each board’s ports.
4. Choose an available port and record its port address.
Each port that is available or unassigned is indicated by a ‘
u
.’ Choose an
available port from a board type that matches your phone type (such as a
port on an analog board for an analog phone).
port on an analog board for an analog phone).
Every phone must have a valid port assignment, also called a port address.
The combined board number and port number is the port address. So, if you
want to attach a phone to the 3rd port on the 01C05 board, the port address
is 01C0503 (01=cabinet, C=carrier, 05=slot, 03=port).
The combined board number and port number is the port address. So, if you
want to attach a phone to the 3rd port on the 01C05 board, the port address
is 01C0503 (01=cabinet, C=carrier, 05=slot, 03=port).
SYSTEM
CONFIGURATION
Board Assigned
Ports
Number Board Type
Code
Vintage u=unassigned t=tti p=psa
01A05
DIGITAL LINE
TN754B 000002
01 u 03 u 05 u 07 08
01A06
ANALOG LINE
TN742
000010
01 02 03 04 u u u u
01B05
ANALOG LINE
TN746B 000008
u u u u u u u u
u u u u u u u u
u u u u u u u u
01C04
ANALOG LINE
TN746B 000008
u u u u u u u u
u u u u u u u u
u u u u u u u u
01C05
DIGITAL LINE
TN2224 000004
01 u u 04 u u 07 08
u u u u u u u u
u u u u u u u u
u u u u u u u u
u u u u u u u u
01C06
HYBRID LINE
TN762B 000004
01 02 u u u u u u
01C09
MET LINE
TN735
000005
01 u u u
01C10
DIGITAL LINE
TN754
000004
u u u u u u u u