Polycom (RMX) 1500 User Manual

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide 

Polycom®, Inc. 

858

The following buttons appear in the tool bar of the Hardware Monitor:

The properties displayed for the hardware components will vary according to the type of component viewed. 
These component properties can be grouped as follows:

● MCU Properties (RealPresence Collaboration Server (RMX) 1500)
● Card Properties (MPMx/MPMRx, CNTL, RTM IP, RTM ISDN)

Type

The type of hardware component card.

Status

The current status of the HW component; Normal, Major, Critical, Resetting, 
Diagnostics, or Empty.

Temperature

Monitors the temperature of the hardware components; Normal, Major and Critical.
Note: Critical condition invokes a system shut down.

Voltage

The voltage threshold of the hardware component; either Normal or Major.

System Reset

Resets and restarts the system. Resetting saves settings and information 
that you changed in the system, i.e. IP Services, etc...

System Shut Down

Shuts down the system into a standby mode. When the user in the 
Collaboration Server Manager/Client presses the System Shut Down 
(red) button in the Hardware Monitor tool bar, the system should enter a 
standby mode and the LED turns ON. Only the media and control unit 
cards are in a standby mode. Shelf Manager remains active.
Turn the system OFF/ON to exit the standby mode.

System Start Up

Starts up the system. 
Note: This button is only displayed when connecting directly to the Shelf 
Management server. 

Shelf Manager

In the HW Monitor this opens the Shelf Management login window.
In the Shelf Management HW Monitor this sets the MFA, CPU and 
Switch (Cards: MPMx/MPMRx, CNTL and RTM IP) into diagnostic mode. 
For more information, see 

Logger Mode

Diagnostics Tests selection and Tests monitoring.
Note: This button is only displayed when connecting directly to the Shelf 
Management server and logged in as a special support user.