Polycom (RMX) 1500 User Manual
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc.
862
ISDN Disconnection Causes
ISDN Disconnection Causes
SIP server error 505
The SIP server sent a SIP Server Error 505 (Version Not Supported)
response.
The server does not support, or refuses to support, the SIP protocol
version that was used in the request.
response.
The server does not support, or refuses to support, the SIP protocol
version that was used in the request.
SIP temporarily not available
The participant's endpoint was contacted successfully but the
participant is currently unavailable (e.g., not logged in or logged in such
a manner as to preclude communication with the participant).
participant is currently unavailable (e.g., not logged in or logged in such
a manner as to preclude communication with the participant).
SIP remote device did not respond in the
given time frame
given time frame
The endpoint did not respond in the given time frame.
SIP trans error TCP Invite
A SIP Invite was sent via TCP, but the endpoint was not found.
SIP transport error
Unable to initiate connection with the endpoint.
SIP unauthorized
The request requires user authentication.
SIP unsupported media type
The server is refusing to service the request because the message
body of the request is in a format not supported by the requested
resource for the requested method.
body of the request is in a format not supported by the requested
resource for the requested method.
Disconnection Cause
Number
Summary
Description
1
Unallocated (unassigned
number)
number)
No route to the number exists in the ISDN network or the number was
not found in the routing table.
•
not found in the routing table.
•
Ensure that the number appears in the routing table.
•
Ensure that it is a valid number and that correct digits were dialed.
2
No route to specified transit
network (national use)
network (national use)
The route specified (transit network) between the two networks does
not exist.
not exist.
3
No route to destination
No physical route to the destination number exists although the dialed
number is in the routing plan.
•
number is in the routing plan.
•
The PRI D-Channel is malfunctioning.
•
Incorrect connection of the span or WAN.
4
Send special information
tone
tone
Return the special information tone to the calling party indicating that
the called user cannot be reached.
the called user cannot be reached.
5
Misdialed trunk prefix
(national use)
(national use)
A trunk prefix has erroneously been included in the called user number.
6
Channel Unacceptable
The sending entity in the call does not accept the channel most
recently identified.
recently identified.
Disconnection Cause
Description