Panasonic WV-SP105E User Manual
42
42
43
Configure the settings relating to the FTP server [FTP]
Click the [FTP] tab on the "Server" page. (☞ Pages 13 and 14: How to display/operate the setup menu)
The settings relating to the FTP server used to transmit the alarm images can be configured on this page.
The settings relating to the FTP server used to transmit the alarm images can be configured on this page.
[FTP server address]
Enter the IP address or the host name of the FTP
server.
Available number of characters: 1 - 128 characters
Enter the IP address or the host name of the FTP
server.
Available number of characters: 1 - 128 characters
Important:
• When entering the host name for "FTP server
address", it is necessary to configure the DNS set-
tings on the [Network] tab of the "Network" page.
(☞ Page 45)
tings on the [Network] tab of the "Network" page.
(☞ Page 45)
[User name]
Enter the user name (login name) to access the FTP
server.
Available number of characters: 1 - 32 characters
[Password]
Enter the password to access the FTP server.
Available number of characters: 0 - 32 characters
Enter the password to access the FTP server.
Available number of characters: 0 - 32 characters
[Control port]
Enter a control port number to be used for the FTP
server.
Refer to the help window to infomation about the
unavailable port number.
Available port number: 1-65535
Default: 21
Enter a control port number to be used for the FTP
server.
Refer to the help window to infomation about the
unavailable port number.
Available port number: 1-65535
Default: 21
[FTP mode]
Select "Passive" or "Active" for the FTP mode.
Normally, select "Passive".When it is impossible to con-
nect after select "Passive", try to connect after select-
ing "Active".
Default: Passive
Select "Passive" or "Active" for the FTP mode.
Normally, select "Passive".When it is impossible to con-
nect after select "Passive", try to connect after select-
ing "Active".
Default: Passive