Panasonic WV-SP105E User Manual

42

42

43

Click the [NTP] tab on the "Server" page. (☞ Pages 13 and 14: How to display/operate the setup menu)
The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on this 
page. 

 •  Use an NTP server when the more accurate time & date setting is required for the system operation.
 
     

[Time adjustment]
Select the time adjustment method from the following. 
Time adjusted by the selected method will be used as 
the standard time of the camera. 
Manual: Time set on the [Basic] tab on the "Basic" 

page will be used as the standard time of the cam-
era. 

Synchronization with NTP server: Time automatically 

adjusted by synchronizing with the NTP server will 
be used as the standard time of the camera. 

Default: Manual

[NTP server address]
Enter the IP address or the host name of the NTP 
server. 

Available number of characters: 1 - 128 characters
Default: None (blank)

 •  When entering the host name for "NTP server

address", it is necessary to configure the DNS set-
tings on the [Network] tab of the "Network" page. 
(☞ Page 45)

 
[NTP port]
Enter a port number of the NTP server. 
Refer to the help window to infomation about the 
unavailable port number.
Available port number: 1 - 65535
Default: 123

[Time adjustment interval]
Select an interval (1 - 24 hours: in 1 hour intervals) of
synchronization with the NTP server. 
Default: 1h

[Time zone]
Select a time zone corresponding to the location where 
the camera is in use.
Default: (GMT) Greenwich, Mean Time: Dublin,

Edinburgh, Lisbon, London