Panasonic WV-SW458E User Manual
32
x
Engage the camera attachment fixing screws of
the camera with the screw hole of the camera
attachment (accessory) and rotate the camera
in the direction of the arrow to secure the cam-
era to the camera attachment (accessory).
attachment (accessory) and rotate the camera
in the direction of the arrow to secure the cam-
era to the camera attachment (accessory).
Rotate the camera until a click is heard so that
the projection of the camera attachment (acces-
sory) will be set to the “LOCK” position.
the projection of the camera attachment (acces-
sory) will be set to the “LOCK” position.
c
Secure the camera with the camera fixing screw.
(Recommended tightening torque: 1.37 N·m
{1.01 lbf·ft})
{1.01 lbf·ft})
IMPORTANT:
• Ensure that the camera fixing screw is firm-
• Ensure that the camera fixing screw is firm-
ly secured.
Failure to observe this may cause a mal-
function or the product to fall, resulting in
injury or accidents.
function or the product to fall, resulting in
injury or accidents.
v
Connect the cables on the side of the mount
bracket. (
☞
Page 25)
Waterproof the connecting portion.
(
(
☞
Page 28)
IMPORTANT:
• Disconnect the 12 V DC power supply and
• Disconnect the 12 V DC power supply and
PoE device for power supply to prevent
power from being supplied during mount-
ing work.
power from being supplied during mount-
ing work.
Projection
Make cable connection and
waterproof the connected section.
waterproof the connected section.
Camera fixing screw