Panasonic WVCP304 User Manual

20

Performs the settings relating to the camera system such as synchronization and privacy zone. 
The following settings can be configured on the "SYSTEM SETUP" screen displayed from the 
top screen. Refer to page 5-6 for how to call up the screen. 

“SYSTEM SETUP” screen

@

 Synchronization method selection [SYNC]

This unit supports the following 2 types of synchronization methods, and one of the following is selected.
(1) Multiplexed vertical drive signal (VD2)
(2) Internal synchronization (INT) (default)
Input  of  a  multiplexed  vertical  drive  signal  (VD2)  automatically  switches  to  the  VD2 
synchronization even if the camera is set to other than the VD2 synchronization method.
When the VD2 synchronization is not selected, internal synchronization can be selected.

A

 Privacy zone setting [PRIVACY ZONE]

When undesired portions in the camera shooting area (on the screen) exist, those portions (pri-
vacy zone) can be set to be hidden. Up to 8 portions can be specified for the privacy zone. 
ON (1):  Grays the zone. 
ON (2):  Mosaics the zone. 
OFF (default):  Displays the zone normally. 
 

Follow the procedure below to set the privacy zone. 

Note:

  •  The privacy zone function is disabled at initializing the unit, i.e. right after turning on the power. 

Step 1

Move the cursor to "PRIVACY ZONE", select "ON (1)" or "ON (2)", and press the [SET] button. 

“SYSTEM SETUP” screen

“ZONE NUMBER” screen