Panasonic WVCP304 User Manual

22

When "ON" is selected, the zoom factor and the panning/tilting settings can be configured. 
Follow the procedure below.

“SYSTEM SETUP” screen

EL-zoom setting screen 

Pan/tilt setting screen

Zoom setting screen

Step 1

Move the cursor to "EL-ZOOM", select "ON" and press the [SET] button. 
→ The "EL-ZOOM" setting screen will be displayed. 

Step 2

Move the cursor to "PUSH SET" of "ZOOM" and press the [SET] button. 
→ The zoom setting screen appears. 

Step 3

Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the [UP] 
or [DOWN] button, and press the [SET] button. 

Note:

 •  When the zoom factor is incremented, resolution will be deteriorated. 

Step 4

Move the cursor to "PUSH SET" of "PAN/TILT" and press the [SET] button. 
→ The pan/tilt setting screen appears. 

Step 5

Use the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the position of the area to be 
set and press the [SET] button. 
The position can be changed in the range of zoom factor set in the "ZOOM" setting screen. 

D

Upside-down setting [UPSIDE-DOWN]

ON:  The video image can be reversed upside down. 
OFF (default):  The video image cannot be reversed upside down.

E

 Lens distortion correction [LDC]

The image may be distorted depending on the lens used and the zoom factor. By adjusting the 
lens  distortion  correction  setting,  the  distorted  image  can  be  converted  to  match  the  square 
monitor and achieve effects desired by the user. 

Note:

 • Depending on the lens used, complete correction may not be achieved.