ZyXEL Communications 3.1 User Manual

 Chapter 8 Route

ZyWALL (ZLD) CLI Reference Guide

[no] source {address6_object|any}

Sets the source IPv6 IP address that the matched packets must have. 
The no command resets the source IP address to the default (any). any 
means all IP addresses.

[no] user user_name

Sets the user name. The no command resets the user name to the 
default (any). any means all users.

[no] policy controll-ipsec-dynamic-rules 

activate

Enables the ZyWALL to use policy routes to manually specify the 
destination addresses of dynamic IPSec rules. You must manually 
create these policy routes. The ZyWALL automatically obtains source 
and destination addresses for dynamic IPSec rules that do not match 
any of the policy routes. 

The no command has the ZyWALL automatically obtain source and 
destination addresses for all dynamic IPSec rules. 

policy default-route

Enters the policy-route sub-command mode to set a route with the 
name “default-route”.

policy delete policy_number

Removes a routing policy.

policy flush

Clears the policy routing table.

policy list table

Displays all policy route settings.

policy move policy_number to policy_number

Moves a routing policy to the number that you specified.

[no] policy override-direct-route activate

Has the ZyWALL forward packets that match a policy route according 
to the policy route instead of sending the packets to a directly 
connected network. Use the no command to disable it.

[no] policy controll-virtual-server-rules 

activate

Gives policy routes priority over NAT virtual server rules (1-1 SNAT). 
Use the no command to give NAT virtual server rules priority over 
policy routes.

[no] policy6 override-direct-route 

activate

Has the ZyWALL forward IPv6 packets that match a policy route 
according to the policy route instead of sending the packets to a 
directly connected network. Use the no command to disable it.

show bwm activation

Displays whether or not the global setting for bandwidth management 
on the ZyWALL is enabled. 

show bwm-usage < [policy-route 

policy_number]  | [interface 

interface_name]

Displays the specified policy route or interface’s bandwidth allotment, 
current bandwidth usage, and bandwidth usage statistics.

show policy-route [policy_number]

Displays all or specified policy route settings.

show policy-route begin <1..200> end 

<1..200>

Displays the specified range of policy route settings.

show policy-route controll-ipsec-dynamic-

rules

Displays whether the ZyWALL checks policy routes first before IPSec 
dynamic rules.

show policy-route override-direct-route

Displays whether or not the ZyWALL forwards packets that match a 
policy route according to the policy route instead of sending the 
packets to a directly connected network.

show policy-route controll-virtual-server-

rules

Displays whether or not policy routes have priority over NAT virtual 
server rules (1-1 SNAT). 

show policy-route6 override-direct-route

Displays whether or not the ZyWALL forwards IPv6 packets that match 
a policy route according to the policy route instead of sending the 
packets to a directly connected network.

show policy-route rule_count

Displays the number of policy routes that have been configured on the 
ZyWALL.

show policy-route underlayer-rules

Displays all policy route rule details for advanced debugging.

Command Summary: Policy Route (continued)