Furuno MU-190 User Manual

3.  OPERATION

Select the signal to display on the entire screen as follows:

1. Press the DISP key to show the DISP selection window. The window shows 

the signal names as you customized them at paragraph 2.4.2. This window 
disappears if there is no operation for five seconds.

2. Press the S or T key to select a signal.

[RGB]: Show the signal from the RGB port.
[DVI1], [DVI2]: Show the signal from the selected DVI port.
[VIDEO]: Show the external video from the VIDEO port.

3. Press the W or X key to close the window. The name of the selected signal appears at the 

right top corner for five seconds after the DISP selection window disappears. If there is no sig-
nal, "NO SIGNAL" appears.

The PIP (picture-in-picture) window, which displays the picture input to the VIDEO port, is avail-
able on the RGB, DVI1 and DVI2 displays.

1. With the RGB, DVI1 or DVI2 display shown, press the PIP key to show the PIP window. To 

hide the PIP window, press the PIP key again.

2. You can move the PIP window by pressing the arrow keys when the menu is closed.

Note: You can adjust the size of the PIP window on the [VIDEO] menu (see section 2.3).

The [SYSTEM] menu controls the brilliance, clears the memory and shows signal status and pro-
gram number.

The auto dimmer feature automatically adjusts the brilliance according to the ambient brightness 
detected by the light sensor on the front panel. Also, you can select the interval at which the bril-
liance is adjusted.

Note: Do not put any objects in front of the light sensor.

1. Press the MENU key to show the menu.

RGB

DVI1

DVI2
VIDEO

PIP window