Toro 91764SL User Manual
Adjustments
Traction Cable Adjustment (Fig. 12)
1. Park machine on a level surface, stop the engine and
open the hood. Remove lower cover from handle.
open the hood. Remove lower cover from handle.
2. Adjust pump end of push-pull cable with pump lever
in neutral starting position by adjusting jam nuts so
distance from seal to threads is 1.00
in neutral starting position by adjusting jam nuts so
distance from seal to threads is 1.00
±
0.05 in.
3. Adjust jam nuts at tiller end of push-pull cable so
traction handle is centered on control handle.
traction handle is centered on control handle.
1
2
Figure 12
1. Jam nuts - pump end
2. Jam nuts - tiller end
Speed Control Adjustment (Fig. 13)
1. Park machine on a level surface, stop the engine and
3. Adjust speed rods (Item 14) so rod end mounting
open the hood.
holes in pivot arms (Items 11, 23) are located vertically
in line with pivot pin (Item 22).
in line with pivot pin (Item 22).
2. Adjust speed control cable (Item 26) so speed stop
lever (Item 9) can move to horizontal position.
lever (Item 9) can move to horizontal position.
1
18
2
3
4
5
26
27
28
29
30
22
23
24
6
7
8
9
10
21
11
12
13
14
15
16
17
18
19
20
8
8
13
8
8
19
20
15
28
24
19
25
Figure 13
HydroJect
™
3000
Page 4 - 11
Adjustments