Yazoo/Kees ZMKW52212 User Manual

English

-

19

SETUP AND ADJUSTMENTS

Mount rear drive wheels using the lug nuts installed 

on the hubs.
Check the tire pressure in all four tires. All tires should 

be 15 psi.

Remove top bolt in control arm and loosen bottom 

bolt, rotate the control levers to the upright position. 

Align the levers so they are even in the neutral 

position. Reinstall hardware and tighten.

1.  Remove seat assembly from the crate.
2.  Remove the four nuts from the bottom of the 

seat. Retain for use later.

3.  Align the seat bottom with the holes in the seat 

frame. Place seat on top of the seat frame and 

secure with the four nuts or knobs removed in 

Step 2.

4.  Connect the wire harness from the seat to the 

frame harness.

Check engine oil with dip stick. Add if needed per 

the engine manufactures specifications. See engine 

manual for oil type and filling specifications.

Motion Control Lever

Control Arm

“F” Full

Mark

Operating

Range