Intel N475 AU80610006240AA User Manual

42

Datasheet

NOTES:
1.

For functional operation, all processor electrical, signal quality, mechanical and thermal 
specifications must be satisfied.

2.

Excessive overshoot or undershoot on any signal will likely result in permanent damage to 
the processor.

3.

Storage temperature is applicable to storage conditions only. In this scenario, the 
processor must not receive a clock, and no lands can be connected to a voltage bias. 
Storage within these limits will not affect the long-term reliability of the device. For 
functional operation, please refer to the processor case temperature specifications.

4.

This rating applies to the processor and does not include any tray or packaging.

5.

Failure to adhere to this specification can affect the long-term reliability of the processor.

6.

V

CC 

is a VID based rail.

Possible damage to the processor may occur if the processor temperature exceeds 150 

°C. 

Intel 

does not ensure functionality for parts that have exceeded temperature above 150 

°C 

due to 

specification violation.

 lists the DC specifications for the processor and are valid only while 

meeting the thermal specifications, clock frequency, and input voltages.

 list the DC specifications for the processor core and I/O 

buffer; they are valid only while meeting specifications for junction temperature, clock 
frequency, and input voltages. The Highest Frequency Mode (HFM) and Lowest 
Frequency Mode (LFM) refer to the highest and lowest core operating frequencies 
supported on the processor. Active mode load line specifications apply in all states 
except in the Deeper Sleep state. V

CC,BOOT 

is the default voltage driven by the voltage 

regulator at power up in order to set the VID values. Unless specified otherwise, all 
specifications for the processor are at T

J

 = 100°C. Care should be taken to read all 

notes associated with each parameter.

V

CCSFR_DMIHMPLL

Processor DMI SFR voltage 
with respect to V

SS

-0.3

2.25

V

V

CC_GIO

Processor GIO voltage with 
respect to V

SS

3.135

3.465

V

T

STORAGE

Storage temperature

-40

85

°C

3,  4,  5

VinLGIO

LGIO Buffer DC Input Voltage 
with Respect to V

SS, 

-0.1

1.45

V

VinAsynch_CMOS CMOS Buffer DC Input Voltage 

with Respect to V

SS 

-0.1

1.45

V