LevelOne PoE Extender, Receiver, Over 2-wire 552021 Leaflet
Product codes
552021
PoE Repeater over
2-wire (Slave)
POT-0110
The POT system, one master & one slave units, provide
a long-reach Ethernet extension with remote Power-
over-Ethernet (PoE) capability over a 2-wire line.
Connection with a Class 0 PD device, the distance
of two-wire 24AWG cables can be up to 400 meters
when using a 48Watt high power PoE Switch,
FSW-0513/0543. Users may select a fixed data rate for
different copper line ranging. The maximum data rate
can be up to 60 Mbps full duplex for 2-wire line.
The POT master unit is powered by the local PoE
Ethernet network, and transmits both the data and
power to the remote slave unit over 2-wire cable. The
remote unit regenerates the power and provides the
PoE capability to power up the remote PD device up
to 15 watts when connecting to 48Watt High Power
Switch, FSW-0513. The POT M/S supports the indoor &
outdoor models with wall-mount feature.
Equipped with dip switches, the 2-wire line speed
can be configured to meet different line gauges and
distances. A POT pair offers a cost effective solution
for remote power applications such as LAN-to-LAN
connectivity, Video Streaming, FTTB, and MDU/MTU
over single twisted line.
Key Features
- Two-wire cables are used to connect 100Mbps Fast
Ethernet PoE devices
- Maximum distance up to 400 meters for 24 AWG
cable
- Maximum data rate up to 60Mbps full duplex
- Remote PoE capability for PD devices of WiFi AP, IP
camera, IP telephones
- Up to 15 Watts for remote PoE, Depending on PSE
power
- Easy installation by indoor & outdoor different
models
- Dip Switches for 2-wire line rate settings
- Auto MDIX for 10/100 Base-Tx Ethernet LAN Ports
- Low-Latency for Video/Voice/Data applications
Works Well With
H/W Version: 1
1
1. LED Indicator
2. Dip Switch
3. RJ-11 In
4. RJ-45 Out
2
3
4
POI-4000
High-power PoE Injector
FSW-0513
4-Port High Power PoE Switch