LevelOne PoE Extender, Receiver, Over 2-wire 552021 Leaflet

www.level1.com  

I

  one world_one brand_one level_



Ethernet Switches

Data Rate: 60/60 Mbps
Power: 48V
RJ-11 Connector x 1

Auto-Detection for 10/100 Base-Tx and Half / Full duplex
Full compatible with IEEE 802.3 / IEEE802.3u
Automatic MDIX Function
RJ-45 Connector x 1

Output Voltage within 44~57V
Safety-Extra-Low-Voltage (SELV) Compliant
Maximum output power 15 Watts

Power: Green On- indicates power is on and normal
LAN:  Green On- indicates Ethernet LAN port is in connection
 

Flashing- indicates Ethernet LAN data activates

Line:  Green On- indicates 2-wire line is in connection
 

Flashing- indicates 2-wire line is in line handshaking

M/S:  Green On-indicates as 2-wire Slave unit
 

Green Off- indicates as 2-wire Master unit

120mm x 90mm x 28mm

Humidity: 5% ~95% non-condensing
Temperature: 0~50°C

FCC Rules Part 15
CE

PoE Repeater over 2-wire (Slave)

POT-0110 x 1, User Manual x 1

All mentioned brand names are registered trademarks and property of their owners. Technical specifications are subject to change without notice. 

 

© Copyright Digital Data Communications GmbH. All Rights Reserved. 

V1.0

Note: These distances are typical results when used with 24AWG RJ-11 Cable

Non-PoE Switch

FSW-0513

1m

48W

100m

PoE PD devices

Ethernet Cable (RJ-45)

PoE (Power + Data)

RJ-11 Phone Line (Power + Data)

up to 400m 

for 2 wire

Non-PoE Switch

POI-4000

1m

40W

100m

PoE PD devices

up to 300m 

for 2 wire