Holder C 9.72 H User Manual
Operating Instructions
145 052
169
C 9700 ... C 9.88 H
Maintenance According to Intervals
Maintenance Every 125 Service Hours
ATTENTION
Carry out the services and inspections only
with the engine turned off.
Carry out the services and inspections only
with the engine turned off.
Checking the Cooling System
-
-
Inspect the cooling fins and oil cooler for the accumu-
lation of dirt.
lation of dirt.
Cleaning the Cooling System
Cleaning with Compressed Air
-
Raise the dump body (loading platform*) and secure it
against accidental lowering.
against accidental lowering.
-
Blow compressed air through from the engine side to
remove any dirt and debris.
remove any dirt and debris.
Cleaning with Cold Cleaner or Water Jet
ATTENTION
Maximum spray pressure 60 bar, maximum
steam temperature 60 °C
Maximum spray pressure 60 bar, maximum
steam temperature 60 °C
Bild_152
-
Raise the dump body (loading platform*) and secure it
against accidental lowering.
against accidental lowering.
-
Spray the oil cooler and engine with a cold cleaner
and allow it to soak in for 10 minutes.
and allow it to soak in for 10 minutes.
-
Clean the oil cooler and engine with a strong water jet.
ATTENTION
Do not aim the water jet directly at delicate
parts such as the alternator; cover them if
necessary.
Do not aim the water jet directly at delicate
parts such as the alternator; cover them if
necessary.
-
Run the engine warm to prevent the formation of rust.
* Option