Holder C 9.72 H User Manual
Operating Instructions
145 052
91
C 9700 ... C 9.88 H
Operating the Implements
Adjusting the Upper Link Mount
The height of the upper link mount can be adjusted. The
required height depends on your implement.
required height depends on your implement.
1 Upper link support
2 Retaining spring
3 Top link pin
4 Height adjustment lever
5 Upper link mount
2 Retaining spring
3 Top link pin
4 Height adjustment lever
5 Upper link mount
-
Raise the height adjustment lever (4).
-
Slide the upper link mount (5) to one of the 4 possible
positions.
positions.
-
Release the height adjustment lever; the upper link
support engages.
support engages.
-
Pull the retaining spring (2) off the pin (3) and pull the
pin to the side.
pin to the side.
-
Adjust the upper link (8) to the proper length (screw in
or out by rotating the sleeve); secure the upper link
with the locking lever (7).
or out by rotating the sleeve); secure the upper link
with the locking lever (7).
-
Insert the pin though eyelet on the upper link and
secure the pin again with the retaining spring.
secure the pin again with the retaining spring.
1
2
3
4
5
6
9
7
8