Holder C 9.92 H User Manual
C 9.92
Operating Instructions
100
153 146
Operating the attachments
Turning on the front PTO
DANGER
The PTO switch (1) must be switched off.
The PTO switch (1) must be switched off.
-
Start the engine.
-
Select the required PTO SPM with the PTO push-pull
rod (3).
rod (3).
NOTE
The push-pull rod (3) is located at the front
right at the front bracket.
The push-pull rod (3) is located at the front
right at the front bracket.
DANGER
Before turning the PTO on, make sure that
no-one is standing close enough to the trac-
tor and the driven attachment to be hurt.
Before turning the PTO on, make sure that
no-one is standing close enough to the trac-
tor and the driven attachment to be hurt.
The PTO gear has 3 positions.
The possible positions are shown on the instruction plate (2).
The possible positions are shown on the instruction plate (2).
-
Set the push-pull rod to the centre position.
The PTO gear will be switched off.
The PTO gear will be switched off.
-
Pull the push-pull rod out.
The PTO speed will be 540 RPM at an engine speed
of 2200 RPM.
The PTO speed will be 540 RPM at an engine speed
of 2200 RPM.
Bild_C992H_093
1
Bild_S 990_007
2
3