Holder C 9.92 H User Manual

-

Push the push-pull rod in.
The PTO speed will be 1000 RPM at an engine speed
of 2390 RPM.

ATTENTION
Never turn the PTO on with the engine off!

-

Increase the engine speed to 1500-1800 RPM.

-

Release the lock at the safety switch (1) and depress
the switch. The front PTO is now turned on.

-

To turn the PTO off, press the safety switch (1) up.

-

If the PTO is no longer required, put the push-pull rod
(3) back to the neutral position.

DANGER
After the PTO is turned off, the installed at-
tachment could continue to run. Wait until the
attachment is stationary before working on it
again.

Bild_C992H_093

1

Bild_S 990_007

2

3