Whirlpool W10607420A-SP Owner's Manual
5
RINSE
You will hear sounds similar to the wash cycle as the
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load.
SPIN
The washer spins the load at increasing speeds for proper
The washer spins the load at increasing speeds for proper
water removal, based on the selected cycle and spin
speed.
DONE
Once the cycle is complete, this light will come on.
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
LOCKED
To allow for proper load sensing and
To allow for proper load sensing and
spinning, the lid will lock and the
Locked light will turn on. This light
indicates that the lid is locked and
cannot be opened.
If you need to open the lid, press
START/PAUSE. The lid will unlock once
the washer movement has stopped.
This may take several minutes if the
load was spinning at high speed.
NOTE: Holding the START/PAUSE Button
will cancel the cycle and cause the washer
to drain.
Press START/PAUSE again to resume the
cycle. Avoid opening the lid during sensing.
The sensing process will start over when
the washer is restarted.