Whirlpool W10607420A-SP Owner's Manual

To dispense fabric softener in the rinse cycle,  

this washer has been designed to allow the use of the Downy 

Ball

®†

 dispenser. Pour a measured amount of Downy

®

 liquid 

fabric softener into the Downy Ball

® 

dispenser, pull the ring 

tightly to seal it, and place on top of load. Always follow 

manufacturer’s directions for correct amount of fabric softener 

based on your load size. Then select 1 Rinse with Softener 

option. The Downy Ball

®

 dispenser will automatically release 

the fabric softener during the rinse cycle. For questions on 

using the Downy Ball

®

 dispenser call 1-800-688-7638 or visit 

www.downy.com.
IMPORTANT: Rinse option must be selected to 1 Rinse 

with Softener or 2 Rinses with Softener to ensure proper 

distribution at correct time in cycle. Do not overfill or dilute. 
Adding Liquid Fabric Softener Manually to Wash Load
During the final rinse, wait until the washer has completed  

filling, press the START/Pause button to pause the washer. 

Lift the lid and add the measured recommended amount of 

liquid fabric softener. Do not use more than the recommended 

amount. Close the lid and press the START/Pause button again 

to start the washer.

Do not overfill, dilute, or use more than 1 cup (250 mL). Do 

not use color-safe bleach or Oxi products in the same cycle 

with liquid chlorine bleach.

Turn cycle knob to choose your wash cycle. 

For best performance, load items 

in loose heaps evenly around the 

washplate. Try mixing different sized 

items to reduce tangling.
IMPORTANT: Items need to move  

freely for best cleaning and to reduce  

wrinkling and tangling.

†®Downy and Downy Ball are registered trademark of The Proctor & Gamble Company.