Black Box MPSH16-D20-120V User Manual
CHAPTER 13: Operation via SNMP
157
13.4.2. Plug Group Status/Control
ON, OFF, BOOT, and DEFAULT commands can be issued for plug groups via
ON, OFF, BOOT, and DEFAULT commands can be issued for plug groups via
SNMP. Plug groups are arranged in a table of 54 rows, one row for each plug group
in the system. Plug Group parameters are described below.
•
plugGroupTable::plugGroupName – String indicating the plug
groups name.
•
plugGroupTable::plugGroupAction – Action to be taken on
plug group
1 – Mark to turn ON (does not execute)
2 – Mark to turn OFF (does not execute)
3 – Mark to BOOT (does not execute)
4 – Mark to DEFAULT (does not execute)
5 – Mark to turn ON and execute plug group actions
6 – Mark to turn OFF and execute plug group actions
7 – Mark to BOOT and execute plug group actions
8 – Mark to DEFAULT and execute plug group actions
Set
plugGroupTable::plugGroupAction to desired action, as specified
by values 1-4 above, for each plug group index the action is to be applied to. For
the last plug group you wish to set before executing the commands, use values 5-8
instead, which will invoke the requested commands all at once.
•
plugGroupTable::plugGroupCurrent – The current, in tenths of an
Amp, that is being consumed by each Plug Group.
•
plugGroupTable::plugGroupPower – The power, in Watts, that is
being consumed by each Plug Group.